Description

Pressure Washer Chemical Injector Acid Injector High Pressure Chemical Injector

Pressure Washer Chemical Injector High Pressure Acid Injector to be used directly at the end of your pressure washer wand keeping chemicals out of the pump. The high capacity acid injector is designed to be used with most acid solutions and will work in ratios 4 to 1 and higher. Nozzles with spray angles of 15, 40 and 65 deg are furnished so that you can custom fit the proper angle spray to your job. The acid injector also works well without a nozzle by applying solution directly in a round spray pattern. It will also work effectively as a Foamer with the use of a foaming type detergent.

Complete, stainless steel body, plated zinc plug Nozzle barrel propels solution to 50′ 5000 PSI maximum, complete with 30′ tubing and quick disconnects

Kit Includes:

(1) Acid Injector body
(3) Nylon Hose Clamp
(1) Hose
(1) PVC ball valve
(1) Strainer Coupler assembly
(3) Spray nozzles
(1) Cone Foot Strainer Body
(1) Replaceable Cone Foot Strainer

For reference Downstream injectors installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.