Want a chance for 10% off your order?

Enter your email below to join our mailing list:

Want a chance for 10% off your order?

Enter your email below to join our mailing list:

FREE SHIPPING ON
ALL QUALIFYING ORDERS

Want a chance for 10% off your order?

Enter your email below to join our mailing list:

Sale!

Grout Pump GP-6 Kenrich Products Hand Operated Grout Pump

$1,797.23

SKU GP-6 Categories , Tag
Facebook
Twitter
LinkedIn
Email
Print

Description

Grout Pump GP-6 Kenrich Products Hand Operated Grout Pump

Grout Pump GP-6

Grout Pump GP-6 by Kenrich pumps are designed to pump most types of cementitious grouts (not recommended for chemical epoxy-type grouts). These pumps are ideal for grouting hollow metal door frames in place as well as placing grout anywhere that high pressure is not required. Other applications include masonry restoration, fireproofing, soil stabilization, filling concrete block, installing NMB Splice Sleeves, waterproofing, tunnels, prison & jail construction, facility maintenance, parking structures, bridge repair, pumping cement slurries and general filling of voids.

Applications:

  • Grouting metal door and windows
  • Filling hollow concrete block
  • Machine base grouting
  • Tilt-up panel joint
  • Soil stabilization
  • Waterproofing
  • Tank stabilization
  • General void filling

Features:

  • Choice of hand-operated or air-powered models
  • Easy to operate, minimal maintenance required
  • Pumps most types of cementitious grouts
  • Lightweight and portable; take pump to where you need the pump
  • Makes an ideal tool for placing grout anywhere that high pressure is not required

Kenrich Grout Pump GP-6

4.6 Gallon Hand Operated Mortar Grout Pump

Ideal For Grouting Metal Door Frames

  • * Hand operated, no electric or air power source needed.
  • * Easy to operate, minimal maintenance required.
  • * Pumps most types of cementitious grout (not for epoxy-type grouts)
  • * Makes an ideal tool for placing grout anywhere that high pressure is not required.
  • * Lightweight and compact.

SPECIFICATIONS

  • Model: GP-6
  • Pump Type: Twin Diaphragm,
  • Self Priming Power Source: Hand Operated
  • Output Capacity: 11 Gallons Per Minute
  • Output Pressure: Zero To 15 PSI
  • Hopper Capacity: .62 Cubic Foot (4.6 Gallons)
  • Placement Hose Size: 1-1/2″ ID by 60 Inches Long,
  • Clear Vinyl Discharge Head: 10 Foot Vertical Lift
  • Dimensions: 16-1/2″ x 25″ x 24″ High
  • Net Weight: 32 Pounds

* Output and performance will vary depending on cycle rate, viscosity of the grout mixture and pressure conditions.

GENERAL INFORMATION The Grout Pump GP-6 is a hand-operated twin diaphragm Grout Pump. It is designed to pump most types of water based grouts (not for epoxy type grouts). This model features two separate pumps connected by common inlet and outlet manifolds. Both pumps are powered by a single pump handle.

DESCRIPTION The pumping action of the pump is achieved by moving the pump handle back and forth (or up and down if the pump handle is in the optional horizontal position). When the pump handle is moved to the right, the grout mixture in the hopper is drawn into the left pump, while at the same time the grout mixture already in the right pump is forced out into the placement hose where it is directed to the work area. When the handle is moved to the left, grout is drawn into the right pump while the grout in the left pump is forced out.

OPERATING INSTRUCTIONS 1) Place grout in a suitable container and mix per manufacturers recomendations. Pour mixed grout mixture into hopper. Some grouts, such as Fosroc Renderoc LA, require that the pump be primed with a cement/water slurry. 2) Move the vertical handle back and forth (or up and down if the pump handle is in the optional horizontal position) to draw the grout mixture from the hopper through the pump and out the clear placement hose to the work area.

CAUTION: VERY MINIMAL PUMP PRESSURE IS REQUIRED TO FILL VOIDS WITH GROUT. NEVER FORCE THE PUMP HANDLE. 3) Be sure the work area is vented to allow any trapped air to escape. 4) Do not allow the grout to harden while inside or on the outside of the pump or related components. Clean immediately after use. 5) This pump is designed to be used with water based grouts only. It is not to be used to pump chemical based epoxy grouts.

PERFORMANCE RECOMMENDATIONS 1) Always use the shortest length of placement hose as possible. The ideal length is five feet long. When grouting door frames, place the pump on a cart or platform to allow use of the standard five foot long placement hose. 2) Always use the largest diameter hose that access will allow. The ideal size is 1-1/2″ inside diameter. Never use a “rubber based” hose. 3) It is always recommended that a quality pre-packaged grout be used. These products usually contain additives that allow the grout to flow easier. 4) If you are mixing your own grout (sand/cement/water) mixture, the mix will require additional cement in order to keep the sand in suspension. When pumping “home made” grout, extra time will be required to find the exact proportions to achieve a pumping mixture. Adding a plasticizer to the mixture will be benificial.

Additional information

Weight 33 lbs
Dimensions 16.5 × 25 × 24 in

Reviews

There are no reviews yet.

Be the first to review “Grout Pump GP-6 Kenrich Products Hand Operated Grout Pump”

THANK YOU FOR JOINING!

Your email was submitted successfully.

YOUR 10% COUPON CODE IS WELCOME10

Category Exclusions:

Arbortech Brick and Mortar Saw, Compaction, Concrete Mixers, Concrete Walk Behind Saws, Drop Hammers, Grout Hogs, iQ Power Tools, Masonry Block Saws, Masonry Brick Saws, Mast Climbers, Mortar Mixers, Mud Buggy, Saws, Scaffold, Self Dumping Hoppers, Shoring, and Stihl