Description

Smart Masonry Clean-Out System

The Smart Masonry Clean-Out System is a revolutionary system used to form Clean-Out Covers for High Lift grouting. It consists of a “T-Bolt,” a re-usable “Nut” and a re-usable transparent “Window.” The “T-Bolt” and “Nut” are made from hard ABS plastic. The transparent “Window” clean-out cover is made of poly carbonate, an extremely durable material commonly used in jet fighter canopies. While the “Nut” and Window” are re-usable, the exposed portion of the “T-Bolt” easily breaks off after removal of the “Nut” and “WIndow” to provide a fast, clean, professional and economical means of forming reinforced masonry clean-out covers.

Installation only takes a few seconds!

Causes no damage to the face of the block and requires no patching of block as with the plywood/nailing method of forming clean-out covers.

Eliminates costly blow-outs that require chiseling and grinding.

Adds to your professional image. The Smart Masonry Clean-Out System, when installed, demonstrates the professionalism expected by engineers, architects, general contractors and especially inspectors. Plywood and hammer cut inspection holes lead to excessive waste and cleanup.

Advanced Placement – allows for inspection through the transparent “Window” and readiness to pour immediately after inspection. No need for hammers, nails, plywood and bruised thumbs.

Quick Installation – can be installed and removed in seconds, vastly reducing labor costs.